Smart Toilet Conversion Kit

Description

Converts smart toilet to accept a Sniffer system air intake tubing connection.  Smart toilet bidet seat needs to be disassembled and opened up for internal modifications to add the required tubing access holes.  Contact a repair professional for installation, if required.

** For add-on bidet seats that mount to a regular toilet, use a Potty Sniffer kit that matches the toilet tank overflow system design

Conversion kit includes:

• • 3/8″ O.D. black vinyl tubing – 3ft
  • (4) 3/8″ tubing collars
  • 3/8″ inline filter strainer

INSTALLATION STEPS

** NOTE:  Required modifications to the smart toilet enclosure may void product warranty

1. Remove underside screws to separate upper and lower sections of bidet seat

2. Determine hole locations for air intake and bidet enclosure tubing access
   Position air intake hole next to existing water drainage holes leading to toilet bowl
   Ensure tubing can be routed in a manner that does not interfere with any moving parts of the bidet

3. Drill 3/8″ diameter hole at each location, starting with small drill (1/8″) and stepping up gradually to 3/8″

4. Install tubing through holes.  Use tubing collars to lock tubing in place at access holes

5. Re-assemble bidet seat.  Use inline filter to make connection from bidet seat to Sniffer system intake tubing